Page 9 - Voltech Instruments PM3300 Universal Power Analyser, designed and produced by Connell Marketing Associated, UK

Menus and Menu/Display Control

MENU Selection within the screen menus and
ESCAPE display functions are made by use of the
cursor arrow keys.
HOLD
ENTER The HOME key resets the cursor to its
default position.

The remaining keys have the following
functions.

MENU

Sets the PM3300 into menu control (see main menu below), and allows
fast exit to the display mode.

ESCAPE

This has two functions. In menu mode, it returns the PM3300 to main
menu (and acts as a CLEAR key to cancel incorrect data entry).

In display mode, it provides a single key return to Multiple Channel Display
if the PM3300 is configured in Barchart or Waveform display.

HOLD

This freezes the currently displayed data, and allows simultaneous data
on all channels to be inspected.

ENTER

This will load the PM3300 with numeric or other data.

THE MAIN MENU

Pressing the MENU key, produces the main menu on display. Seven menus are provided:

CONFIGURE PM3300

display
wiring
printer
interface
integrator
datalog
applications

display Display control options (see pages 4 & 5)
wiring
printer Sets wiring configuration and shunt selection (see pages 10 & 11)
interface
Selects INTERNAL or EXTERNAL (RS232 of Centronics) printer.
integrator Sets up measurement functions for printout, and printout interval.
datalog
applications Programs the digital and analog interfaces of the PM3300 (see
page 14)

Programs the integrator set up, for manual, external or timed
control (see page 8).

Programs the Datalog setup for recording and analyzing short
term events (see page 8).

Provides access to a range of embedded application specific
measurement modes (see page 15) and calibration menu.

9