Page 20 - Irisbus vehicle specification sheets designed and produced by www.connellmarketing.com

DAILY WAY Minibus 14 Passengers

 BODYWORK / EXTERIOR EQUIPMENT  ENGINE

Frame: C-section steel longitudinal side members connected by tubular cross IVECO F1A EURO 4
members riveted to long members. Diesel 4 cylinders in line,
Body made of pressed steel panels. Total displacement 2300 cc
Anti-corrosion protection includes full cataphoretic dipping in order to reach the Common Rail High Pressure Direct Injection.
boxed sections and strategic use of zinc plated panels in vulnerable areas. EDC Engine control system
Protective under seal of the body. Maximum power 100 kW (136 HP) at 3.000 - 3.900 rpm
Front Bumper: single piece in SMC plastic material. Maximum torque 320 Nm at 1.700 ÷ 3.000 rpm
Rear Bumper: two edge bumpers fitted in the lower extremities of the rear body panel Wastegate valve
plus a rear Central Bumper in plastic material. VGT turbine

Metallic colour painting on the steel parts of the body Water engine heater
Metallic colour painting of the upper part of the front bumper and of the two Blow by pipe
rubber parts on the roof Heated fuel filter
External mirrors with integrated indicator side and warning lights and dedicated wide Cruise control
angle Speed limiter
Heated and electrically adjustable 2nd speed limiter – 30km/h
Passenger door: manually operated side sliding door + wide opening door with steps
that improves the passenger accessibility  GEARBOX
Remote control to open/close the passenger door.
Two rear doors with two fixed windows. Mechanical, ZF 5S-300 Overdrive with 5 speeds plus reverse.
Rear tail lights with reverse and fog lights on both sides Ratios: 1st 1:5.375 - 6th 1:0.791 - Reverse 1:4.838
Spoiler with decompression gate on the upper rear part
Third stop light on the upper part of the vehicle Agile® gear box automatic controlled ZF 6AS-400 that allows to drive in fully automatic or
sequential mode
 INTERIOR EQUIPMENT Ratios: 1st 1:4.99 - 5th 1:0.78

Inside roof ceiling trimmed with fabric upholstery.  DRIVE / REAR AXLE
Side’s panels underneath the windows frame easy clean material.
Iveco with full-floating single reduction
Lower side panels trimmed with Grey fabric Ratio:1:3,75
Emergency and ventilation roof hatch.
14 non adjustable passenger seats fixed to the floor and covered in fabric. FRONT AXLE / STEERING
Seats with 3 point seat belt.
In the driver compartment the floor is made of rubber; in the passenger saloon, the Iveco with independent wheels.
floor is in plywood trimmed with coloured rubber. Hydraulic type; left hand drive.
Floor covering of the passenger saloon in PVC Steering wheel diameter 430 mm
Adjustable seats (except on the last row) in fabric Steering column cover in plastic material.
Seats covered with Velvet material Steering lock.
Covering of the head of the passenger seats

WINDOWS / THERMAL COMFORT  SUSPENSION

Heated Windscreen by heated-resistant tempered safety glass Front (mechanical) Double wishbone with torsion bar - Independent front suspension with
Side windows with single glasses green coloured with upper sliding part. adjustable torsion bar anchored to the chassis integrated with double-acting telescopic
Driver's compartment area heating by hot water heat exchanger. shock absorbers.
4 speeds electrical fan with air distribution functions and air recirculation for driver Rear (mechanical) parabolic double leaf - Parabolic rear suspensions single or multi-leaf with
compartment. double-acting telescopic shock absorbers.
Driver compartment manual fresh air ventilation.
Heating for passenger compartment by means of convector, static heat exchanger. Pneumatic rear suspension.
Supplementary heating system with autonomous system
 BRAKES
Ceiling Electric/extraction fan.
Thermo-acoustic insulation on the roof and on the floor Complies with EC standard hydraulically operated with vacuum servo assistance
Thermo-acoustic insulation on the sides Service brake: Full Disk type on front and rear axle.
Air conditioning driver area Emergency brake: integrated in the service brake.
Air conditioning passenger compartment with free rear distribution Parking brake: mechanical handbrake, operating on the rear wheels.
ABS (Anti-lock Braking System) + EBD (Electronic Brake force Distribution) + ASR (Anti Slip
DRIVING POSITION Regulation - avoids the wheels slipping during start and running)

Driver door: Wide opening door with fixed step that improves the driver accessibility ABS + EBD + ASR + ESP (Electronic Stability Program - contains the Hill Holder Control
and comfort; sliding window driver door. system).

Electric driver window with anti-pinch system, closure with remote control and drop  ELECTRICAL EQUIPMENT
system
Internal plastic panel incorporating the armrest and a deep document pocket. CAN BUS architecture
Gearlever on the Dashboard and controls easy to reach Nominal tension 12 V
Electronic instrument cluster Battery 110 Ah
Comfort cluster in order to have all the travel information Battery Protection Module
Steering wheel with secure and ergonomic comfortable grip Engine Starter motor 2,3 kW
Clamp for papers and documents Alternator 110 A
Digital tachograph
2 DIN drawers available on the upper part of the dashboard Alternator 140A
Seat Built-in head restraint, with lumbar support, cloth upholstered seatbelt. Central emergency switch.
Protection bar behind the driver seat Head lights with integrated Fog lights.
Adjustable seat
Adjustable and air suspended seat 13-Pin Trailer socket
Adjustable, air suspended and heated seat Passenger entrance illumination turns on when the door opens
Driver's Airbag. Light fixture in the driver compartment.
Reverse alarm with night switch
Reverse camera with 5” screen  FUEL TANK
Sound indicator for reverse
A locking fuel tank made of plastic material
Tank total capacity 90 litres

RADIO / VIDEO

Radio - CD Player & Microphone and Amplifier set.
Digital Watch.

Liquid Crystal Colour Monitor with DVD player
Navigation system

 WHEELS AND TYRES

Tyres 225/65 R16 Single front and rear.
Spare wheel holder, extractable.

Two wheel chocks.
Rain mud flap on front and rear wheels.
Aluminium Cover Wheels

ECE 2001/85 Homologation

Main option

IRISBUS (UK) Limited – Iveco House – Station Road - Watford – Hertfordshire WD17 1SR - www.irisbus.co.uk - © IRISBUS
IRISBUS (UK) Limited reserves the right to modify specifications at anytime without prior notice