Page 2 - Irisbus vehicle specification sheets designed and produced by www.connellmarketing.com

DAILY 50C15 DAILY 50C15 EURO 4 MINIBus SHELL

EQUIPMENT WHEELS

– Rear opening doors with heated windows. – Type: Single front and twin rear with front wheel nut covers.One piece steel disc - 6JK
– Rear Door opening height 1780mm (H3 door 1990mm).Door angle 270 degrees. 16H six stud spigot fixing.Spare wheel and carrier mounted on rear/side of chassis.
– Panoramic tinted windows.
– Standard M2 Floor with wheel arches or M2 Flat Floor without. TYRES
– Fitted with 10 rows of M2 Unwin quick release tracked flooring.
– Roof Hatch 770mm x 520mm. – Type:195/75 R16 tubeless radial.
– SpareWheel and Carrier,
– Tool Kit ELECTRICS

NOTE:If the vehicle is fitted with a Flat Floor please deduct 50mm from the internal vehicle height.. – Alternator: 14v 140amp.
– Starter:12v 2.2kW.
TRIM – Battery: 12v 110Ah negative earth return with isolator and central control for both

– Saloon floor inAnti slip Polyfloor - Storm Blue 4560. fuel and electrics.
– Sound insulation. – Tachograph:TDTCO digital type.
– Window surrounds finished in moulded grey wipe clean vinyl. – Wipers:Two blade,two speed with electrically operated twinjet washers.
– Roof finished in velour type washable material and fitted with four saloon speakers – All obligatory lights to EEC standard and all circuits protected by fuses.

and 4 low voltage lights incorporating blue night lights. CAB
– Minibus Shell also supplied untrimmed upon request.
– Seating: Driver’s seat adjustable for height,reach and rake fitted with headrest.
NOTE: The information in this literature is intended to be of a general nature only.Irisbus (UK) Limited reserves the – Storage:A4 compartment.
right to modify or change specifications at any time.For more detailed information,consult your dealer. – Windows: Electric.
– Airbag: Drivers.
ENGINE – Passenger Seats: Dual - Except Slam Door.
– Holders: 2 cup and bottle plus clip.
– Type: Euro 4 Iveco 3.0 HPI, four stroke diesel cycle, direct injection, turbocharged – Heating: Dynamic pressure heating and ventilation system with windscreen demist,
and intercooled. Water cooled with electro-magnetic fan. Cast iron block and
aluminium head.High pressure common rail injection system generation 2. air recirculation unit, thermostatic temperature control and four speed fan with 5
distribution points.
– Cylinders: 4 in line. – Dashboard:
– Displacement: 3.0 litres. - Dash mounted gear lever.
– Max Output: 107kW (146hp) @ 3000 - 3500rpm. - Coolant temperature indicator.
– MaxTorque: 350Nm (258lbft) @ 1400 - 2600rpm. - LCD Comfort display includes - odometer,trip computer,time,fuel consumption,

CLUTCH headlamp,clock etc.
- Rev counter and speedometer.
– Type:Hydraulic single dry plate. - Provision for GPS.
– Diameter:280mm (11 inch). - Equipment: Ignition located on steering column along with switch functions for
– Contact area:772cm2.
lights,windscreen wash/wipe and horn.Immobiliser activated by transponder on
GEARBOX - Manual ignition key. Fog lights and headlamp leveller with switches on dash panel. Fuse
panel and cover incorporated in dash panel.Glove box and cigar lighter.Two dash
– Type: ZF S6-400 OD six speed synchromesh. panel speakers plus two audio speakers in saloon roof. Four recessed interior
– 1st gear: 5.37:1. cabin lights - One roof hatch 770mm x 520mm.
– 6th gear: 0.79:1.
– Geared speed: 97mph (Max Speed Limited to 100kph). CORROSION PROTECTION
– Gradability: at gvw % - 38.
– Rear Axle: Ratio:- 3.62:1. – Body panels galvanised in vulnerable areas.All surfaces cleaned and zinc phosphate
coated. Electronic cathodic deposition process by full immersion in paint bath.
GEARBOX - Automatic Primer applied to all external and internal surfaces. Box sections wax injected and
wheel arches,under body and seams protected by sealant and mastic.
– Type:AGile Six speed synchromesh.
– 1st gear: 5.373:1. ACCESSORIES
– 6th gear: 0.791:1.
– Torque:Converter Ratio:2.05:1 – Tool kit,wheel brace,jack and driver’s handbook.
– Geared speed: 72 mph @ 3000rpm (Max Speed Limited to 100kph).
– Gradability: at gvw - 35% (Max). DOOR OPTIONS
– Rear Axle: Ratio:- Ratio:5.13:1.
Slam-door, Side Sliding door, Plug door and Electric Mid door versions are available for
REAR AXLE this Minibus Shell with modifications listed below

– Type:Fully floating single reduction. Hypoid gearing. – Slam Door:
– Ratio: 4.180:1. - Manually operated slam door.
- Door height 1690mm - DoorWidth 1110.
FRAME - 330mm high drop well step.
- Panoramic exterior bonded saloon tinted windows.
– Construction: Pressed steel channel section side members and tubular cross members. - Option of off side sliding emergency door.
Anti corrosion protection includes full catephoretic dipping with galvanized boxed – Side Sliding Door:
sections and zinc plated panels.SMC bumpers and side mouldings. - Manually operated side sliding door.
- Door height 1700mm - Door width 1420mm.
EXHAUST - 1st Step 330mm high - 620 wide.
- 2nd Step 570mm high - 620 wide.
– Type: Offside exit complete with grease shields. - 3rd Step 780 Floor height.
- Panoramic exterior bonded saloon tinted windows.
FUEL TANK - Option of off side sliding emergency door.
– Plug Door:
– Type: 70 Litres (plastic) located offside with locking cap. - Electrically operated plug door with automatic fold out step.
- Door height 1960mm - Door width 750mm.
SUSPENSION - 1st Step 360mm high - 510mm wide.
- 2nd Step 550mm high - 550mm wide.
– Type Front: Independent torsion bar with rubber rebound buffers. - 3rd Step 780mm Floor height.
– Type Rear: Parabolic leaf spring with rubber rebound buffers. - Panoramic exterior bonded saloon tinted windows.
– Shock absorbers:Telescopic front and rear. – Mid Door:
– Stabilisers: Anti-roll bar front and rear. - Electrically operated Mid Door.
- Door Height 2670mm - Door width 660mm.
STEERING - 1st Step 330mm high - 620 wide.
- 2nd Step 570mm high - 620 wide.
– Type:Power assisted rack and pinion,420mm dia.steering wheel and column lock. - 3rd Step 780 Floor height.
- Panoramic exterior bonded saloon tinted windows.
BRAKES
MISCELLANEOUS
– Type: Dual circuit hydraulic with vacuum servo. Discs all round. Delay valve in front
circuit to reduce pad wear. - 100Km/h Speed Limiter.

– Circuits: Separate front and rear circuits controlled by dual master cylinder.Secondary
braking by split system.

– Parking: Mechanical handbrake on rear wheels. ABS, and EBD: fitted as standard.
– Disc Size: Front 290mm and Rear 289mm.
– Surface area: 552cm2 (Total).

IRISBUS (UK) Limited - Iveco House - Station Road - Watford - Herfordshire WD17 1SR - © IRISBUS Ref: 00 – May 2008
Tel: +44 (0) 1923 259660 Fax: +44 (0) 1923 259623 Web: www. irisbus.co.uk Email: info@irisbus.com
Irisbus (UK) Limited reserves the right to modify specifications without prior notice