Page 70 - Irisbus vehicle specification sheets designed and produced by www.connellmarketing.com
P. 70
50C13 Daily Chassis Cowl
ENGINE SUSPENSION CAB
Type: Iveco 8140 .43S four stroke diesel Front: Independent torsion bar with Seating: Driver's seat adjustable for
cycle, direct injection, turbocharged and rubber rebound buffers. height, reach and rake.With headrest.
inter-cooled. Water cooled with electro- Constructed to PSV regulations.
magnetic fan. Cast iron block and Rear: Semi-elliptic leaf spring with rubber
aluminium head. Common rail injection rebound buffers. Heating: Dynamic pressure heating
system. and ventilation system with windscreen
Shock absorbers: Telescopic front and demist vents, air recirculation unit,
Cylinders: 4 in line rear. thermostatic temperature control and
four speed fan. Two outlets to footwell
94.4 mm bore x 100 mm stroke. Stabilsers: Anti-roll bar front and rear. and four adjustable face level outlets.
Displacement: 2798 cm2 STEERING Gauges: EEC automatic electronic
2-man tachograph, fuel level (with low
Max Output: 92kW (125 hp) Power assisted rack and pinion, 420 mm level warning light), coolant
dia. steering wheel and column lock. temperature (with high temperature
@ 3600 rpm warning light).
BRAKES
Max Torque: 290 Nm (29.5 kgm) Warning Lights: Fuel contamination,
Type: Dual circuit hydraulic with vacuum air filter condition, low oil pressure and
@ 1800 rpm servo. Discs all round. Delay valve in front level, direction indicators, rear fog
circuit to reduce pad wear. lights, low brake fluid, brake disc pad
Compression Ratio: 18.5:1 wear, parking brake, lights on,
Circuits: Separate front and rear circuits headlight main beam.
To 91/542EC (Euro 3) controlled by dual master cylinder.
Secondary braking by split system. Equipment: Ignition located on steering
CLUTCH column along with switch functions for
Parking: Mechanical handbrake on rear lights, windscreen wash/wipe and horn.
Type: Hydraulic single dry plate. wheels. Immobiliser activated by transponder
on ignition key Fog lights and
Diameter: 267 mm (10½ inch) ABS, ABD and EBD: Standard headlamp leveller with switches on
dashpanel. Fuse panel and cover
Contact area: 665 cm2 Disc Size: 290 mm incorporated in dashpanel. Glove box,
cigar lighter, two dashpanel speakers
GEARBOX Surface area: 552 cm2 with pre-wired provision for radio.
Type: ZF S6-300 six speed synchro. WHEELS CORROSION PROTECTION
1st gear: 6.77:1 Single front and twin rear with front Panels galvanised in vulnerable areas.
wheel nut covers. One piece steel disc All surfaces cleaned and zinc
6th gear: 1.00:1 - 5JK16H six stud spigot fixing. Spare phosphate coated. Electronic cathodic
wheel supplied loose. deposition process by full immersion in
Max. geared speed: 79 mph paint bath. Primer applied to all
TYRES external and internal surfaces. Box
Max gradability at gvw: 35% sections wax injected and wheel
195/75 R16 tubeless radial. arches and underbody protected by
REAR AXLE mastic.
ELECTRICS
Type: Fully floating single reduction. ACCESSORIES
Alternator: 14v 120 amp
Hypoid gearing Tool kit, wheel brace, jack, first aid kit,
Starter: 12v 2.2 kW driver's handbook and wheel chocks.
Ratio: 3.615:1
Battery: 12v 110 Ah negative earth OPTIONS
FRAME return with isolator and central control
for both fuel and electrics. Telma retarder (factory fit to special
Construction: Pressed steel channel order).
section side members and tubular Wipers: Two blade, two speed with
cross members. Riveted construction electrically operated twinjet washers. Rear air suspension (factory fit to
with body mounting brackets and front special order)
towing eye. All obligatory lights to EEC standard
and all circuits protected by fuses.
EXHAUST
Rear exit complete with grease shields.
FUEL TANK
90 Litres (plastic) located offside.
Irisbus (UK) Limited
Tel.No. 01296 469400
Lit. No. MBC50C13E3/072002 QF61 Jul-02
